Dewalt Portable Forced Air Kerosene Heater, DXH135HD

Dewalt portable forced air kerosene construction heater, 135,000 Btu., F340690
Manufacturer part number: DXH135HD
$429.00

DeWALT Portable Forced Air Kerosene Construction Heater: DXH135HD

The DXH135HD thermostatically controlled forced air kerosene heater burns at 135,000 BTU/HR and can be used with kerosene diesel, fuel oil or JP-8 fuels. With a included wheel kit, protective roll cage and an 14 gallon tank you will get a full 14 hours of run time and the ability to heat up to approximately 3375 square feet of space. 

 

  • Equipped with a 25°F-95°F thermostat. The heating element cycles on and off to maintain the set temerature.
  • Front barrel support and storage provides added barrel rigidity and creates storage for wet gloves or service parts like filters or igniters.
  • Roll cage style handles provide solid all around protection and support.
  • 10" flat free tires for long lasting maintenance free use.
  • Recessed controls designed to reduce the risk of damage on the jobsite.
  • Continuous electronic ignition is always present as a source of ignition for unburned fuel, reducing the ability for fuels to pool and collect in a dangerous manner.
  • Output: 135,000 Btu/hr.
  • Heating area: 3,375 sq. ft.
  • Fuel tank capacity: 14 gal.
  • Full tank run time: 14 hours
  • Cuel Consumption: 1.0 gal./hr.
  • Output (CFM):  300 CFM
  • Weight:    lbs.

Currently only shipping this item within the 48 contiguous United States.

DeWALT Portable Forced Air Kerosene Construction Heater: DXH135HD

The DXH135HD thermostatically controlled forced air kerosene heater burns at 135,000 BTU/HR and can be used with kerosene diesel, fuel oil or JP-8 fuels. With a included wheel kit, protective roll cage and an 14 gallon tank you will get a full 14 hours of run time and the ability to heat up to approximately 3375 square feet of space. 

 

  • Equipped with a 25°F-95°F thermostat. The heating element cycles on and off to maintain the set temerature.
  • Front barrel support and storage provides added barrel rigidity and creates storage for wet gloves or service parts like filters or igniters.
  • Roll cage style handles provide solid all around protection and support.
  • 10" flat free tires for long lasting maintenance free use.
  • Recessed controls designed to reduce the risk of damage on the jobsite.
  • Continuous electronic ignition is always present as a source of ignition for unburned fuel, reducing the ability for fuels to pool and collect in a dangerous manner.
  • Output: 135,000 Btu/hr.
  • Heating area: 3,375 sq. ft.
  • Fuel tank capacity: 14 gal.
  • Full tank run time: 14 hours
  • Cuel Consumption: 1.0 gal./hr.
  • Output (CFM):  300 CFM
  • Weight:    lbs.

Currently only shipping this item within the 48 contiguous United States.

Product tags